VGA_pong
- For this Example also we have used following PMOD: Digilent-VGA-PMOD
- VGA PMOD is connected to the beaglewire P3, P4 Pmods.
- pinmap can be found in pcf file.
- It is connected upside down to port3 and port4.
- Detailed Steps
- Switches Information:
| Switch | Description |
|---|---|
| Start Button | USR0 |
| Player1_Paddle_UP | PMOD1_0 |
| Player1_Paddle_Down | PMOD1_1 |
| Player2_Paddle_UP | PMOD1_2 |
| Player2_Paddle_Down | PMOD1_3 |
Flash the FPGA with VGA example bitstream
cd Beaglewire/examples/vga_pong
# If the fpga tools present on BBB
make
# Else scp the .bin file in Beaglewire/examples/vga_pong
# In host computer go to Beaglewire/examples/vga_pong
# make
# Command to send it to FPGA:
# scp vga.bin debian@192.168.6.2:/home/debian/Beaglewire/examples/vga_pong
# Loading SPI flash after FPGA reset, it will be boot up on SPI.
make load_spi
# Reset the FPGA for running bitsream (RST Button on BeagleWire)
Demo: